[h=1]SAMSUNG G920P[FIX] No signal after update/flash to 6.0 /7.1.1[/h]
[FONT="]There may be some of you who are not getting signal or just "Emergency Calls Only" after update/upgrade/flash to 6.0 (MM).
There's a simple solution which I found after many and many tries.
Modem:
Step 1. Download the Modem attached.
Step 2. Open Odin, look for the file and put it in CP.
Step 3. Flash it.
Step 4. There's not step 4.
Enjoy your signal.
[h=2]2ND TRICK [/h][/FONT]
[FONT="]
[/FONT]
[FONT="]I did the following to fix the issue.
1. Dial ##72786#
2. Press Yes to reset the Provisioning Settings to default.
3. Reboot the Phone.[/FONT]
[FONT="]
Just make a ##SCRTN#. If not rebooting auto, reboot manualy (wait about 30 sec).
After that all is worked =)
[FONT="]There may be some of you who are not getting signal or just "Emergency Calls Only" after update/upgrade/flash to 6.0 (MM).
There's a simple solution which I found after many and many tries.
Modem:
Gizli içeriği görüntüleme kayıtlı kullanıcılar için mevcuttur!
Step 1. Download the Modem attached.
Step 2. Open Odin, look for the file and put it in CP.
Step 3. Flash it.
Step 4. There's not step 4.
Enjoy your signal.
[h=2]2ND TRICK [/h][/FONT]
[FONT="]
[/FONT]
[FONT="]I did the following to fix the issue.
1. Dial ##72786#
2. Press Yes to reset the Provisioning Settings to default.
3. Reboot the Phone.[/FONT]
[FONT="]
Just make a ##SCRTN#. If not rebooting auto, reboot manualy (wait about 30 sec).
After that all is worked =)
Gizli içeriği görüntüleme kayıtlı kullanıcılar için mevcuttur!
Gizli içeriği görüntüleme kayıtlı kullanıcılar için mevcuttur!
Benzer Konular
-
Firmware A055F U10 Ua Os15 Scatter Firmware
TimurGsm · · Cevaplar: 0
-
TimurGsm Adb Enabled Dosyaları
PHONE-REPAÝR · · Cevaplar: 4
-
TimurGsm G935 S, L, K, W, F, FD Converto G935f 7.1.1
TimurGsm · · Cevaplar: 2
-
TimurGsm S7 EDGE G9350 Global Room
TimurGsm · · Cevaplar: 1
-
TimurGsm Samsung All Free Firmware
TimurGsm · · Cevaplar: 1
